First Tek
Quality Inspector
First Tek, Naples, Florida, United States, 33939
Roles and Responsibilities:With minimum guidance in a team environment, using independent judgement to determine quality and usability, responsible for a wide variety of complex inspection requirements.
RESPONSIBILITIES:- Responsibilities may include some or all of the following:- Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications.- Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history.
INSPECTION:- Perform inspection on complex parts using a wide variety of measuring and test equipment.- Adapt and develop complex inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts.- Perform first article and envelope inspections, source inspections, and/or complex surface plate set-ups.- Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.- Layout all component part characteristics onto rough or semi-machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing.- Make own gaging set-ups on surface plate using block, parallels, clamps, sine plates and V-blocks to take readings with precision measuring instruments.- Adapt inspection equipment to check standard, non-standard and special products.- Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary.Qualifications and Education Requirements:-High School Diploma or Equivalent- Five years related inspection experience or demonstrated ability to perform described responsibilities.- Knowledge of applicable military standards or specifications.- May be required to be certified as a Level II Nondestructive Test Inspector in at least three disciplines or as a Level III Examiner in at least one discipline. Certification must be in accordance with MIL-STD-410 and PES1-29.- Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.- Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.- Knowledge of electro-hydraulic servo systems and the computer IEEE systems.
Personal hand tools may be required.May be required to lift up to 50 lbs.Must demonstrate effective verbal, written and communication skills.Ability to work effectively with others and be a participative team player
Pay Range:The pay range for this position is $26.00-$27.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Benefits:The benefits available with this position include:Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)Continuous Employment Development and LearningOngoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement401KHealthcare Group Medical Coverage & Healthcare for California onlyDental Insurance CoverageVision Insurance CoverageBasic Life Insurance & AD&DLong Term DisabilityVoluntary Short-Term DisabilityDirect DepositHealth Savings and Flexible Spending Accounts
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
RESPONSIBILITIES:- Responsibilities may include some or all of the following:- Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications.- Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history.
INSPECTION:- Perform inspection on complex parts using a wide variety of measuring and test equipment.- Adapt and develop complex inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts.- Perform first article and envelope inspections, source inspections, and/or complex surface plate set-ups.- Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.- Layout all component part characteristics onto rough or semi-machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing.- Make own gaging set-ups on surface plate using block, parallels, clamps, sine plates and V-blocks to take readings with precision measuring instruments.- Adapt inspection equipment to check standard, non-standard and special products.- Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary.Qualifications and Education Requirements:-High School Diploma or Equivalent- Five years related inspection experience or demonstrated ability to perform described responsibilities.- Knowledge of applicable military standards or specifications.- May be required to be certified as a Level II Nondestructive Test Inspector in at least three disciplines or as a Level III Examiner in at least one discipline. Certification must be in accordance with MIL-STD-410 and PES1-29.- Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.- Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.- Knowledge of electro-hydraulic servo systems and the computer IEEE systems.
Personal hand tools may be required.May be required to lift up to 50 lbs.Must demonstrate effective verbal, written and communication skills.Ability to work effectively with others and be a participative team player
Pay Range:The pay range for this position is $26.00-$27.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Benefits:The benefits available with this position include:Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)Continuous Employment Development and LearningOngoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement401KHealthcare Group Medical Coverage & Healthcare for California onlyDental Insurance CoverageVision Insurance CoverageBasic Life Insurance & AD&DLong Term DisabilityVoluntary Short-Term DisabilityDirect DepositHealth Savings and Flexible Spending Accounts
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.