Northrop Grumman Corp. (JP)
Principal / Senior Principal Defect Metrology Engineer
Northrop Grumman Corp. (JP), Linthicum, Maryland, United States,
Requisition ID: R10173604
Category:
Engineering
Location:
Linthicum, Maryland, United States of America
Clearance Type:
Secret
Telecommute:
No - Teleworking not available for this position
Shift:
1st Shift (United States of America)
Travel Required:
Yes, 10% of the Time
Relocation Assistance:
Relocation assistance may be available
Positions Available:
1
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work.
The Northrop Grumman Microelectronics Center (NGMC) is seeking an exceptionally talented, motivated, and creative
Defect Metrology Engineer
position located at our Linthicum, MD facility.
The Advanced Technology Lab (ATL), part of Northrop Grumman Microelectronics Center (NGMC), located outside of Baltimore, Maryland, designs, manufactures, and tests semiconductor products for internal and commercial production customers as well as emerging technology programs. The
Defect Metrology Engineer
should possess knowledge of defect metrology, defect detection techniques and practices. The selected candidate should have an aptitude for data analysis, technology development and demonstrate an ability to communicate well with others and work equally well independently and as part of a team.
The Defect Metrology Engineer will be responsible for but not limited to:
Maintaining, existing, and developing new in-line defect metrology recipes and techniques for defect inspection and review tools.
Assisting with ongoing efforts to integrate in-line defect metrology into our process flows.
Writing and maintaining process documentation.
Partnering with vendors and equipment engineers to drive existing and future tools to meet foundry and program needs.
Supporting statistical process control (SPC), continuous improvement efforts, and the management and dissemination of metrology data.
This position is required to be fully on-site.
This job may be filled as a Principal Defect Metrology Engineer or Senior Principal Defect Metrology Engineer based on the qualifications below.
Basic Qualifications for Principal Defect Metrology Engineer:
Bachelors degree in Electrical Engineering, Chemical Engineering, Materials Engineering, Mechanical Engineering, Chemistry, Physics or other related technical discipline with 5+ years of relevant experience (3 years with MS and 0 with PhD).
General understanding of defect inspection and review tools (such as dark field, bright field, and scanning electron microscopes).
Basic knowledge of statistical process control.
Hands on experience with Si, GaAs, or other wafers.
1 year experience with semiconductor fabrication.
Ability to work in a cleanroom setting.
Ability to obtain and maintain a Secret clearance.
US citizenship required.
Basic Qualifications for Senior Principal Defect Metrology Engineer:
Bachelors degree in Electrical Engineering, Chemical Engineering, Materials Engineering, Mechanical Engineering, Chemistry, Physics or other related technical discipline with 8+ years of relevant experience (7 years with Masters and 4 with PhD).
General understanding of defect inspection and review tools (such as dark field, bright field, and scanning electron microscopes).
Basic knowledge of statistical process control.
Hands on experience with Si, GaAs, or other wafers.
1 year experience with semiconductor fabrication.
Ability to work in a cleanroom setting.
Ability to obtain and maintain a Secret clearance.
US citizenship required.
Preferred Qualifications:
Hands on knowledge and operation of defect inspection and review tools.
Experience in lean manufacturing practices and structured problem-solving methodology.
Experience working in a cleanroom setting.
Data analysis and visualization (JMP).
Experience utilizing KLA, Advanced Materials (AMAT) equipment.
Experience with coordinating with vendors.
Experience developing technical specifications for equipment procurement.
Active Secret clearance with ability to obtain Top Secret Clearance.
Salary Range:
$102,400 - $153,600
Salary Range 2:
$127,000 - $190,600
The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
#J-18808-Ljbffr
Category:
Engineering
Location:
Linthicum, Maryland, United States of America
Clearance Type:
Secret
Telecommute:
No - Teleworking not available for this position
Shift:
1st Shift (United States of America)
Travel Required:
Yes, 10% of the Time
Relocation Assistance:
Relocation assistance may be available
Positions Available:
1
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work.
The Northrop Grumman Microelectronics Center (NGMC) is seeking an exceptionally talented, motivated, and creative
Defect Metrology Engineer
position located at our Linthicum, MD facility.
The Advanced Technology Lab (ATL), part of Northrop Grumman Microelectronics Center (NGMC), located outside of Baltimore, Maryland, designs, manufactures, and tests semiconductor products for internal and commercial production customers as well as emerging technology programs. The
Defect Metrology Engineer
should possess knowledge of defect metrology, defect detection techniques and practices. The selected candidate should have an aptitude for data analysis, technology development and demonstrate an ability to communicate well with others and work equally well independently and as part of a team.
The Defect Metrology Engineer will be responsible for but not limited to:
Maintaining, existing, and developing new in-line defect metrology recipes and techniques for defect inspection and review tools.
Assisting with ongoing efforts to integrate in-line defect metrology into our process flows.
Writing and maintaining process documentation.
Partnering with vendors and equipment engineers to drive existing and future tools to meet foundry and program needs.
Supporting statistical process control (SPC), continuous improvement efforts, and the management and dissemination of metrology data.
This position is required to be fully on-site.
This job may be filled as a Principal Defect Metrology Engineer or Senior Principal Defect Metrology Engineer based on the qualifications below.
Basic Qualifications for Principal Defect Metrology Engineer:
Bachelors degree in Electrical Engineering, Chemical Engineering, Materials Engineering, Mechanical Engineering, Chemistry, Physics or other related technical discipline with 5+ years of relevant experience (3 years with MS and 0 with PhD).
General understanding of defect inspection and review tools (such as dark field, bright field, and scanning electron microscopes).
Basic knowledge of statistical process control.
Hands on experience with Si, GaAs, or other wafers.
1 year experience with semiconductor fabrication.
Ability to work in a cleanroom setting.
Ability to obtain and maintain a Secret clearance.
US citizenship required.
Basic Qualifications for Senior Principal Defect Metrology Engineer:
Bachelors degree in Electrical Engineering, Chemical Engineering, Materials Engineering, Mechanical Engineering, Chemistry, Physics or other related technical discipline with 8+ years of relevant experience (7 years with Masters and 4 with PhD).
General understanding of defect inspection and review tools (such as dark field, bright field, and scanning electron microscopes).
Basic knowledge of statistical process control.
Hands on experience with Si, GaAs, or other wafers.
1 year experience with semiconductor fabrication.
Ability to work in a cleanroom setting.
Ability to obtain and maintain a Secret clearance.
US citizenship required.
Preferred Qualifications:
Hands on knowledge and operation of defect inspection and review tools.
Experience in lean manufacturing practices and structured problem-solving methodology.
Experience working in a cleanroom setting.
Data analysis and visualization (JMP).
Experience utilizing KLA, Advanced Materials (AMAT) equipment.
Experience with coordinating with vendors.
Experience developing technical specifications for equipment procurement.
Active Secret clearance with ability to obtain Top Secret Clearance.
Salary Range:
$102,400 - $153,600
Salary Range 2:
$127,000 - $190,600
The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
#J-18808-Ljbffr