Eaton
Assembly Test Technician
Eaton, Jackson, Mississippi, United States, 39200
Eaton’s IS AER FMC division is currently seeking a Assembly Test Technician.
The hourly rate for this position is $20.67 per hour. The hours for first shift are as follows; 7:00 am - 3:30 pm. However, this is a flexible shift - meaning final shifts are based on seniority.
What you’ll do:
Assembles and builds all non-Marine & Defense sub-assemblies, rotating group, pumps, and motors having close tolerances and critical operating requirements where fitting, alignment, and adjustment are precise.
Completes all required quality and customer information on reports and documents.
Must be able to troubleshoot and repair to full operational status, all REO and failed test stand pumps and motors.
Sets up and/or operates all assembly department test stands without assistance and maintains appropriate requirements. In cases where automated test stands are present, operator may be responsible for the operation of two stands.
Reads and interprets test procedures to determine if the unit meets all applicable quality and standards requirements. Read gauges as required by the test procedures and transfers applicable/required data to defined quality reports and documents.
Interpret hydraulic schematics, pressure gauges, strip recorders and test stand "x-y" plots. Must be able to read and interpret assembly and component prints and component maintenance manuals as may be required.
Responsible for the cleaning and packing operations required for the rotating group processing.
Utilizes hand tools in building and testing units. Employs measurement instrumentation such micrometers, venire calipers, etc. to check/verify dimensional assembly requirements as needed.
Responsible for maintaining cleanliness and order in all working areas maintaining that area to the highest degree of cleanliness required for assembly operations.
Ability to read and complete inspection ledger, inspection check sheet, operation sheet, move ticket and discrepancy report (DR) and other paperwork as necessary to comply with Quality Systems.
Responsible for notifying supervisors when work received does not meet the specifications required by previous operators including paperwork requirements as observable.
Performs operator defined preventative maintenance (TPM) and/or 5S tasks as required.
Responsible for returning all tools to their proper location at the end of the shift and cleaning work area.
Proper use of all tools and gages necessary to complete and to verify that all work performed has been completed to specifications as required.
Subassembly operations such as, installation of pins, plugs, inserts, bearings, miscellaneous components, etc.
Performs minor sanding, lapping, deburr or repair work as required in the course of performing the primary duties of the classification.
Compliance to Manufacturing Self-Release Process (MSRP), and responsible for the quality of the product going to next operation.
Responsible for safety for self and for other employees in the area.
Other duties as required or assigned within the job classification.
Qualifications:
BASIC QUALIFICATIONS:
High school diploma or GED required
Minimum two (2) years of experience performing mechanical assembly, disassembly, and troubleshooting in a manufacturing, military, or aviation environment is required.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
No relocation benefits are being offered for this position. Only candidates residing within 50miles of Eaton’s Jackson, MS facility will be considered for this position.
Skills:
PREFERRED QUALIFICATIONS:
Certification in Hydraulic Mechanics or related field from an accredited college or vocational school
Associates degree in a technical field (e.g., Machining Technology, Mechanics, Industrial Technology, Maintenance) from an accredited institution
Prior work experience with hydraulic systems in an aviation or military setting
Understanding of and ability to manipulate mechanical systems
Experience in tool making
Familiarity with various types of test equipment used to test hydraulic systems and components
A&P Mechanic certification
#LI-SB2
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (https://www.eaton.com/content/dam/eaton/company/careers/US%20Benefits%20updated%2010.24.22.pdf) for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The hourly rate for this position is $20.67 per hour. The hours for first shift are as follows; 7:00 am - 3:30 pm. However, this is a flexible shift - meaning final shifts are based on seniority.
What you’ll do:
Assembles and builds all non-Marine & Defense sub-assemblies, rotating group, pumps, and motors having close tolerances and critical operating requirements where fitting, alignment, and adjustment are precise.
Completes all required quality and customer information on reports and documents.
Must be able to troubleshoot and repair to full operational status, all REO and failed test stand pumps and motors.
Sets up and/or operates all assembly department test stands without assistance and maintains appropriate requirements. In cases where automated test stands are present, operator may be responsible for the operation of two stands.
Reads and interprets test procedures to determine if the unit meets all applicable quality and standards requirements. Read gauges as required by the test procedures and transfers applicable/required data to defined quality reports and documents.
Interpret hydraulic schematics, pressure gauges, strip recorders and test stand "x-y" plots. Must be able to read and interpret assembly and component prints and component maintenance manuals as may be required.
Responsible for the cleaning and packing operations required for the rotating group processing.
Utilizes hand tools in building and testing units. Employs measurement instrumentation such micrometers, venire calipers, etc. to check/verify dimensional assembly requirements as needed.
Responsible for maintaining cleanliness and order in all working areas maintaining that area to the highest degree of cleanliness required for assembly operations.
Ability to read and complete inspection ledger, inspection check sheet, operation sheet, move ticket and discrepancy report (DR) and other paperwork as necessary to comply with Quality Systems.
Responsible for notifying supervisors when work received does not meet the specifications required by previous operators including paperwork requirements as observable.
Performs operator defined preventative maintenance (TPM) and/or 5S tasks as required.
Responsible for returning all tools to their proper location at the end of the shift and cleaning work area.
Proper use of all tools and gages necessary to complete and to verify that all work performed has been completed to specifications as required.
Subassembly operations such as, installation of pins, plugs, inserts, bearings, miscellaneous components, etc.
Performs minor sanding, lapping, deburr or repair work as required in the course of performing the primary duties of the classification.
Compliance to Manufacturing Self-Release Process (MSRP), and responsible for the quality of the product going to next operation.
Responsible for safety for self and for other employees in the area.
Other duties as required or assigned within the job classification.
Qualifications:
BASIC QUALIFICATIONS:
High school diploma or GED required
Minimum two (2) years of experience performing mechanical assembly, disassembly, and troubleshooting in a manufacturing, military, or aviation environment is required.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
No relocation benefits are being offered for this position. Only candidates residing within 50miles of Eaton’s Jackson, MS facility will be considered for this position.
Skills:
PREFERRED QUALIFICATIONS:
Certification in Hydraulic Mechanics or related field from an accredited college or vocational school
Associates degree in a technical field (e.g., Machining Technology, Mechanics, Industrial Technology, Maintenance) from an accredited institution
Prior work experience with hydraulic systems in an aviation or military setting
Understanding of and ability to manipulate mechanical systems
Experience in tool making
Familiarity with various types of test equipment used to test hydraulic systems and components
A&P Mechanic certification
#LI-SB2
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (https://www.eaton.com/content/dam/eaton/company/careers/US%20Benefits%20updated%2010.24.22.pdf) for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.