Jacobs , LLP
Terminal Improvement - Baggage Handling System SME (LAWA Construction Manager II
Jacobs , LLP, Los Angeles, California, United States, 90079
The Sr. Baggage Handling System SME based out of Los Angeles, California, reports to the Sr. Baggage Handling System SME and is responsible for ensuring systems meet technical requirements during design and construction-related activities for TDIP’s Baggage Handling System projects. The Baggage Handling System projects include the Baggage Optimization Project - Phase 2 which includes the replacement of the CBIS/CBRA rooms in TBIT, the Terminal 4 Baggage Handling System project which includes replacement of make-up and distribution systems from ticketing to make-up (excluding CBIS/CBRA) and the inbound systems, and the Terminal 5 CTX project which includes recapitalization of the T5 CBIS and CBRA. Duties will also include trouble shooting existing operating BHS systems within LAWA and working closely with LAWA’s Operations group.
The Baggage Handling System SME is responsible for assisting in managing the scope, cost, schedule and operational interfaces of all design and construction related activities for the Baggage Handling System projects. The Sr. Baggage Handling System SME will be focused on schedule certainty, budget delivery and making sure that construction work meets the required quality standards while enforcing a strong health, safety, and environmental culture on the project. The Baggage Handling System Project SME will ensure the development and implementation of design, construction, testing, commissioning, turnover plans, impacts to the operations, ensuring that risk mitigation for construction activities are optimized, working and coordinating with stakeholders and ensuring LAWA standards are adhered to.
Essential Job Duties
Experience in design and spec development/commissioning/installation of in-bound, out-bound baggage systems with in-line security systems conforming to TSA requirements with knowledge of mechanical, electrical and control systems.
Layout and Installation BIM Coordination with other trades for conflict resolution.
Managing RFI’s, Submittals, Changes, Quality Assurance, etc.
The consultant shall have thorough knowledge of Mechanical systems and equipment along with an understanding of applicable codes and permitting requirements.
Provide support in close out activities/administration.
Element-Specific Requirements
Typical conveyor systems and high speed systems such as Independent Carrier or cart systems.
Basic knowledge with bag tracking; coordination with TSA for CBIS (Checked Bag Inspection Stations), CTX machines, OSR (On Screen Resolution), MUX (Multiplexing Equipment); testing under TSA guidelines with Batelle; interfacing and coordination with BHS stakeholders which includes Airlines Ticket Counters, TSA, SITA BSM (Baggage Source Messaging), Airline bag handlers, and BHS Operator/Maintenance.
Provide Project closeout administration including coordination and assistance for final inspection.
Monitor and review the contractor's record drawings.
Apply comprehensive knowledge of various disciplines to be used during design and construction.
Become thoroughly familiar with required contractual obligations and technical aspects of all facilities to be designed and constructed.
Monitors, reviews and comments on the overall planning of construction activities to identify critical milestones and priorities.
Keep alert to possible problem areas and take preventative action to ensure that critical milestones are met for each phase of the project.
Contribute to the advancement of TDG's goals through commitment to productive collaboration with all stakeholders.
Perform other responsibilities associated with this position as may be appropriate.
May assume other duties as required/needed.
Maybe required to work past regular work shift
Maybe required to work various shifts as needed
LAWA will provide a desktop computer that can be VPN’d into
Consultant MUST have a company-provided laptop computer. This is required for company business and to VPN into LAWA system when away from the office as necessary
Cell phone provided by consultant is required
This is NOT a work from home position
This is a salaried position based on 40 hours per week at the applicable all-in labor rate.
This is a Monday-Friday full-time position in the office or on the project site at LAX
After hours or weekend work may be required to perform the duties of the position. This shall be considered part of the salary
Transportation to/from LAX worksite is the responsibility of the consultant
Bachelor’s degree in Construction Management, Engineering or other related field.
5 years or more of experience in maintenance and operation of Baggage Handling Systems.
5 years or more of experience in airport construction.
Experience in the construction of large aviation related projects at domestic and/or foreign airport locations.
Experience on Activation team at large domestic or international airport.
Comprehensive knowledge of construction-related processes, as well as a thorough knowledge of industry practices.
Possess technical skills in project management, aviation operations, training, documentation, communications, and/or operational or technology testing.
Proven leadership and management capability.
Good written and oral communications skills.
Word, Prolog, Outlook, Office 365, which also includes Excel and PowerPoint.
Ideally, you'll also have:
Master's degree
Optional certifications may include AAAE, LEED, PE, PMP, AICP, etc. or any other relevant professional licensure and/or certifications
Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.
The Baggage Handling System SME is responsible for assisting in managing the scope, cost, schedule and operational interfaces of all design and construction related activities for the Baggage Handling System projects. The Sr. Baggage Handling System SME will be focused on schedule certainty, budget delivery and making sure that construction work meets the required quality standards while enforcing a strong health, safety, and environmental culture on the project. The Baggage Handling System Project SME will ensure the development and implementation of design, construction, testing, commissioning, turnover plans, impacts to the operations, ensuring that risk mitigation for construction activities are optimized, working and coordinating with stakeholders and ensuring LAWA standards are adhered to.
Essential Job Duties
Experience in design and spec development/commissioning/installation of in-bound, out-bound baggage systems with in-line security systems conforming to TSA requirements with knowledge of mechanical, electrical and control systems.
Layout and Installation BIM Coordination with other trades for conflict resolution.
Managing RFI’s, Submittals, Changes, Quality Assurance, etc.
The consultant shall have thorough knowledge of Mechanical systems and equipment along with an understanding of applicable codes and permitting requirements.
Provide support in close out activities/administration.
Element-Specific Requirements
Typical conveyor systems and high speed systems such as Independent Carrier or cart systems.
Basic knowledge with bag tracking; coordination with TSA for CBIS (Checked Bag Inspection Stations), CTX machines, OSR (On Screen Resolution), MUX (Multiplexing Equipment); testing under TSA guidelines with Batelle; interfacing and coordination with BHS stakeholders which includes Airlines Ticket Counters, TSA, SITA BSM (Baggage Source Messaging), Airline bag handlers, and BHS Operator/Maintenance.
Provide Project closeout administration including coordination and assistance for final inspection.
Monitor and review the contractor's record drawings.
Apply comprehensive knowledge of various disciplines to be used during design and construction.
Become thoroughly familiar with required contractual obligations and technical aspects of all facilities to be designed and constructed.
Monitors, reviews and comments on the overall planning of construction activities to identify critical milestones and priorities.
Keep alert to possible problem areas and take preventative action to ensure that critical milestones are met for each phase of the project.
Contribute to the advancement of TDG's goals through commitment to productive collaboration with all stakeholders.
Perform other responsibilities associated with this position as may be appropriate.
May assume other duties as required/needed.
Maybe required to work past regular work shift
Maybe required to work various shifts as needed
LAWA will provide a desktop computer that can be VPN’d into
Consultant MUST have a company-provided laptop computer. This is required for company business and to VPN into LAWA system when away from the office as necessary
Cell phone provided by consultant is required
This is NOT a work from home position
This is a salaried position based on 40 hours per week at the applicable all-in labor rate.
This is a Monday-Friday full-time position in the office or on the project site at LAX
After hours or weekend work may be required to perform the duties of the position. This shall be considered part of the salary
Transportation to/from LAX worksite is the responsibility of the consultant
Bachelor’s degree in Construction Management, Engineering or other related field.
5 years or more of experience in maintenance and operation of Baggage Handling Systems.
5 years or more of experience in airport construction.
Experience in the construction of large aviation related projects at domestic and/or foreign airport locations.
Experience on Activation team at large domestic or international airport.
Comprehensive knowledge of construction-related processes, as well as a thorough knowledge of industry practices.
Possess technical skills in project management, aviation operations, training, documentation, communications, and/or operational or technology testing.
Proven leadership and management capability.
Good written and oral communications skills.
Word, Prolog, Outlook, Office 365, which also includes Excel and PowerPoint.
Ideally, you'll also have:
Master's degree
Optional certifications may include AAAE, LEED, PE, PMP, AICP, etc. or any other relevant professional licensure and/or certifications
Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.