NY CREATES
WETS Manufacturing Engineer/Tool Owner
NY CREATES, Albany, New York, United States, 12205
About NY CREATES:
NY CREATES serves as a bridge for advanced electronics, leads projects that advance R&D in emerging technologies, and generates the jobs of tomorrow. NY CREATES also runs some of the most advanced facilities in the world, boasts more than 2,700 industry experts and faculty, and manages public and private investments of more than $20 billion - placing it at the global epicenter of high-tech innovation and commercialization.
Job Description:
Job Description for WETS Manufacturing Engineer /Tool Owner
JOB SUMMARY
This engineering position is for a Manufacturing Engineer / Tool Owner specifically for the WETS sector in the 300mm fab facility. This position is responsible for equipment installation and qualification, advanced process development, evaluation, and characterization targeting advanced semiconductor applications; thorough 300mm equipment and process qualification specific to front end of line (FEOL), middle of the line (MOL) and back end of the line (BEOL) WETS applications.
Job responsibilities include but are not limited to:
The primary responsibility for this position is the WETS sector, both in fab and lab environment. Expectations are to learn other sectors for example CMP/Plating/Films/etc. to provide backup for fellow peer engineers and to be well rounded.
Maintaining and controlling various vendor tools to tight specifications dedicated by the needs of the technologies.
Establish process specifications and control charts for tool monitoring
Working knowledge of SIVIEW (MES) to implement the building of routes for tool controls as well as building WSPC charts for tool monitoring
The tools will be controlled using SPC charts and Western Electric Rules.
Learning various toolsets across multiple tooling vendors
Must be able to recover tool faults/fails
In addition, the engineer will manage technicians to support the fab for 24/7 coverage.
Able to track and process lots on tools as needed for the business commitments
Responsible for writing operational procedures (MPS) for each toolset/process
Responsible for the backing up of tool parameters and process recipes at some set time interval
Able to train and certify operators to process these tools after releasing of the tool to OPS
Develop a good working relationship with all the FSE that support the tools.
The applicant will need to work for tooling vendors and operations management daily.
Time management is a must to work effectively between process support and equipment support
Other reasonable duties as assigned.
Requirements:
Minimum Requirements for WETS Manufacturing Engineer/Tool Owner
A.S. degree in Materials Science, Physics, or equivalent Engineering and/or Science discipline AND 5+ years of experience working in the semiconductor industry as a Process Development Engineer in one or more areas of WETS applications
OR
B.S./ M.S. degree in Materials Science, Physics, or equivalent Engineering and/or Science discipline AND 2+ years of experience working in the semiconductor industry as a Process Development Engineer in one or more areas of WETS applications.
A good understanding of FEOL and BEOL semiconductor integration schemes, in addition to knowledge and experience in logic and memory device fabrication is required.
Exhibit solid leadership ability, be familiar with SPC/DOE methodologies, and be willing to execute a variety of tasks on short notice.
Applicant must be familiar with WETS chemistries and applications for a variety of chemistries.
Applicant must have a foundation of process and equipment knowledge pertaining to WETS sector
Good program management and customer interface skills are essential.
The successful applicant must be able to interface effectively with fab operations, process and semiconductor engineering professionals from client companies.
Knowledge of MS Office, DOE, and yield/defectivity analysis software are strongly recommended.
This position is contingent on the satisfactory completion of a background check; this position may require annual background checks.
PREFERRED REQUIREMENTS for Wets Manufacturing Engineer/Tool Owner
2+ Years WETS Engineering Experience
Working knowledge of SiView (MM and SM)
Familiarity and experience with FEOL, MOL and BEOL applications
Applications related to CMOS and memory (RRAM & MRAM) applications.
Program Management Experience
Don't meet every requirement? At NY CREATES we are dedicated to building a welcoming, diverse and inclusive workplace. If you are excited about working for NY CREATES but your experience doesn't exactly align perfectly with the job description, we encourage you to apply anyway, you might still be a perfect fit or a fit for another role at NY CREATES.
Benefits
Medical, Vision, and Dental
Competitive Pay and PTO
Flexible Heath Spending and Dependent Care Accounts
Basic / Optional Life Insurance
Post-Retirement Health Insurance
Employer contribution of 7% of earnings to a Basic Retirement plan after meeting one year of service.
Optional employee contributed retirement account.
Location:
257 Fuller Road, Albany, NY 12203
Salary Range:
Level A- 2 to 5 years of experience $75,000-$100,000
Level B- 5+ years' experience $100,000-$125,000
*Posted salary ranges are determined upon experience and education.
Additional Information:
NOTE: Some positions require access to export-controlled commodities, technical data, technology, software, or restricted programs where U.S. Government authorization may be required.
For positions requiring such access, offers of employment are contingent upon the employer being able to obtain the necessary authorization, including, if required, an export license from the U.S. Department of Commerce's Bureau of Industry and Security, the U.S. Department of State's Directorate of Defense Trade Controls, or other government agencies. The decision to pursue an export license application is at The Research Foundation for SUNY's sole discretion. Proof of status may be required prior to employment in connection with necessary authorizations.
Employment is with the Research Foundation for SUNY which is an Equal opportunity Employer including individuals with disabilities and protected veterans.
In compliance with the Americans with Disabilities Act (ADA), if you have a disability and require a reasonable accommodation to apply please call Human Resources at 518-437-8686.
recblid zfgn3j2yqxj6fsqi328ctpd530lr9t
NY CREATES serves as a bridge for advanced electronics, leads projects that advance R&D in emerging technologies, and generates the jobs of tomorrow. NY CREATES also runs some of the most advanced facilities in the world, boasts more than 2,700 industry experts and faculty, and manages public and private investments of more than $20 billion - placing it at the global epicenter of high-tech innovation and commercialization.
Job Description:
Job Description for WETS Manufacturing Engineer /Tool Owner
JOB SUMMARY
This engineering position is for a Manufacturing Engineer / Tool Owner specifically for the WETS sector in the 300mm fab facility. This position is responsible for equipment installation and qualification, advanced process development, evaluation, and characterization targeting advanced semiconductor applications; thorough 300mm equipment and process qualification specific to front end of line (FEOL), middle of the line (MOL) and back end of the line (BEOL) WETS applications.
Job responsibilities include but are not limited to:
The primary responsibility for this position is the WETS sector, both in fab and lab environment. Expectations are to learn other sectors for example CMP/Plating/Films/etc. to provide backup for fellow peer engineers and to be well rounded.
Maintaining and controlling various vendor tools to tight specifications dedicated by the needs of the technologies.
Establish process specifications and control charts for tool monitoring
Working knowledge of SIVIEW (MES) to implement the building of routes for tool controls as well as building WSPC charts for tool monitoring
The tools will be controlled using SPC charts and Western Electric Rules.
Learning various toolsets across multiple tooling vendors
Must be able to recover tool faults/fails
In addition, the engineer will manage technicians to support the fab for 24/7 coverage.
Able to track and process lots on tools as needed for the business commitments
Responsible for writing operational procedures (MPS) for each toolset/process
Responsible for the backing up of tool parameters and process recipes at some set time interval
Able to train and certify operators to process these tools after releasing of the tool to OPS
Develop a good working relationship with all the FSE that support the tools.
The applicant will need to work for tooling vendors and operations management daily.
Time management is a must to work effectively between process support and equipment support
Other reasonable duties as assigned.
Requirements:
Minimum Requirements for WETS Manufacturing Engineer/Tool Owner
A.S. degree in Materials Science, Physics, or equivalent Engineering and/or Science discipline AND 5+ years of experience working in the semiconductor industry as a Process Development Engineer in one or more areas of WETS applications
OR
B.S./ M.S. degree in Materials Science, Physics, or equivalent Engineering and/or Science discipline AND 2+ years of experience working in the semiconductor industry as a Process Development Engineer in one or more areas of WETS applications.
A good understanding of FEOL and BEOL semiconductor integration schemes, in addition to knowledge and experience in logic and memory device fabrication is required.
Exhibit solid leadership ability, be familiar with SPC/DOE methodologies, and be willing to execute a variety of tasks on short notice.
Applicant must be familiar with WETS chemistries and applications for a variety of chemistries.
Applicant must have a foundation of process and equipment knowledge pertaining to WETS sector
Good program management and customer interface skills are essential.
The successful applicant must be able to interface effectively with fab operations, process and semiconductor engineering professionals from client companies.
Knowledge of MS Office, DOE, and yield/defectivity analysis software are strongly recommended.
This position is contingent on the satisfactory completion of a background check; this position may require annual background checks.
PREFERRED REQUIREMENTS for Wets Manufacturing Engineer/Tool Owner
2+ Years WETS Engineering Experience
Working knowledge of SiView (MM and SM)
Familiarity and experience with FEOL, MOL and BEOL applications
Applications related to CMOS and memory (RRAM & MRAM) applications.
Program Management Experience
Don't meet every requirement? At NY CREATES we are dedicated to building a welcoming, diverse and inclusive workplace. If you are excited about working for NY CREATES but your experience doesn't exactly align perfectly with the job description, we encourage you to apply anyway, you might still be a perfect fit or a fit for another role at NY CREATES.
Benefits
Medical, Vision, and Dental
Competitive Pay and PTO
Flexible Heath Spending and Dependent Care Accounts
Basic / Optional Life Insurance
Post-Retirement Health Insurance
Employer contribution of 7% of earnings to a Basic Retirement plan after meeting one year of service.
Optional employee contributed retirement account.
Location:
257 Fuller Road, Albany, NY 12203
Salary Range:
Level A- 2 to 5 years of experience $75,000-$100,000
Level B- 5+ years' experience $100,000-$125,000
*Posted salary ranges are determined upon experience and education.
Additional Information:
NOTE: Some positions require access to export-controlled commodities, technical data, technology, software, or restricted programs where U.S. Government authorization may be required.
For positions requiring such access, offers of employment are contingent upon the employer being able to obtain the necessary authorization, including, if required, an export license from the U.S. Department of Commerce's Bureau of Industry and Security, the U.S. Department of State's Directorate of Defense Trade Controls, or other government agencies. The decision to pursue an export license application is at The Research Foundation for SUNY's sole discretion. Proof of status may be required prior to employment in connection with necessary authorizations.
Employment is with the Research Foundation for SUNY which is an Equal opportunity Employer including individuals with disabilities and protected veterans.
In compliance with the Americans with Disabilities Act (ADA), if you have a disability and require a reasonable accommodation to apply please call Human Resources at 518-437-8686.
recblid zfgn3j2yqxj6fsqi328ctpd530lr9t