SpaceX
Structures Technician (Panel Shop) - 2nd Shift
SpaceX, Hawthorne, California, United States, 90250
Structures Technician (Panel Shop) - 2nd Shift at SpaceX
Hawthorne, CA
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
STRUCTURES TECHNICIAN (PANEL SHOP) - 2ND SHIFT
RESPONSIBILITIES:
Modify, repair, assemble, and install rocket and spacecraft components and subcomponents
Use tooling holes, pilot holes, or by hand (as required), per drawing or tooling instructions
Align parts and secure in place using clecos or tooling/hand clamps
Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner)
Shim and/or trim parts as required
Select drill bits, reamers and/or countersinking tools for pilot and full-size holes
Locate, drill pilot holes using drill motor and proper size drill bit(s)
Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor
Deburr panels per drawing, using proper tools (e.g., deburr knife, rotary tools and orbital sander)
Set countersinking tools to proper depth as required
Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners
Use solvents to clean surfaces prior to sealing or assembly
Apply sealant, Alodine, primer, adhesives, special finishes
Load and unload ovens to bond detail parts to assemblies
Determine and obtain correct type and size fasteners
Cold work holes to prepare for close tolerance fastener installation
Install bushings into housings using arbor press and/or hydraulic puller
Apply liquid nitrogen to facilitate installation of bushings
Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing
Self-check work after completion using QA instruments to ensure it is complete per drawing
Handle and dispose of hazardous materials in approved manner
BASIC QUALIFICATIONS:
High school diploma or equivalency certificate
1+ years of experience in hardware assembly, test, maintenance, material handling, and/or installation; OR certificate from an accredited trade skills program in A&P, manufacturing, and/or electronics
PREFERRED SKILLS AND EXPERIENCE:
2+ years of professional structural assembly experience
A&P license
Experience drilling, reaming, honing and/or countersinking straight and close tolerance holes
Experience gained through the military or within an aviation manufacturing company
Experience using various types of hand tools and/or hand-held power tools, floor-mounted power tools and precision measuring tools
Capable of visualizing a three-dimensional shape from a two-dimensional view and understanding symbols, flag notes, and general notes
Ability to perform basic arithmetic calculations accurately (addition, subtraction, multiplication, division, decimals and fractions)
Experience making basic layouts on parts or assemblies in order to establish reference points and to check dimensions
Experience reading and interpreting engineering drawings, blueprints, and specifications
ADDITIONAL REQUIREMENTS:
Must be willing to work all shifts, additional overtime, and weekends as needed
Must be able to work the following shift:
2nd shift (Monday - Friday: 4:00pm-3:30am)
Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
Must be able to lift up to 25 lbs. unassisted
COMPENSATION AND BENEFITS:
Pay range:
Structures Technician/Level 1: $22.00 - $27.00/hour
Structures Technician/Level 2: $25.00 - $32.50/hour
Structures Technician/Level 3: $30.00 - $38.00/hour
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short & long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation & will be eligible for 10 or more paid holidays per year.
ITAR REQUIREMENTS:
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here (https://www.pmddtc.state.gov/?id=ddtc_kb_article_page&sys_id=24d528fddbfc930044f9ff621f961987) .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000.
Hawthorne, CA
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
STRUCTURES TECHNICIAN (PANEL SHOP) - 2ND SHIFT
RESPONSIBILITIES:
Modify, repair, assemble, and install rocket and spacecraft components and subcomponents
Use tooling holes, pilot holes, or by hand (as required), per drawing or tooling instructions
Align parts and secure in place using clecos or tooling/hand clamps
Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner)
Shim and/or trim parts as required
Select drill bits, reamers and/or countersinking tools for pilot and full-size holes
Locate, drill pilot holes using drill motor and proper size drill bit(s)
Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor
Deburr panels per drawing, using proper tools (e.g., deburr knife, rotary tools and orbital sander)
Set countersinking tools to proper depth as required
Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners
Use solvents to clean surfaces prior to sealing or assembly
Apply sealant, Alodine, primer, adhesives, special finishes
Load and unload ovens to bond detail parts to assemblies
Determine and obtain correct type and size fasteners
Cold work holes to prepare for close tolerance fastener installation
Install bushings into housings using arbor press and/or hydraulic puller
Apply liquid nitrogen to facilitate installation of bushings
Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing
Self-check work after completion using QA instruments to ensure it is complete per drawing
Handle and dispose of hazardous materials in approved manner
BASIC QUALIFICATIONS:
High school diploma or equivalency certificate
1+ years of experience in hardware assembly, test, maintenance, material handling, and/or installation; OR certificate from an accredited trade skills program in A&P, manufacturing, and/or electronics
PREFERRED SKILLS AND EXPERIENCE:
2+ years of professional structural assembly experience
A&P license
Experience drilling, reaming, honing and/or countersinking straight and close tolerance holes
Experience gained through the military or within an aviation manufacturing company
Experience using various types of hand tools and/or hand-held power tools, floor-mounted power tools and precision measuring tools
Capable of visualizing a three-dimensional shape from a two-dimensional view and understanding symbols, flag notes, and general notes
Ability to perform basic arithmetic calculations accurately (addition, subtraction, multiplication, division, decimals and fractions)
Experience making basic layouts on parts or assemblies in order to establish reference points and to check dimensions
Experience reading and interpreting engineering drawings, blueprints, and specifications
ADDITIONAL REQUIREMENTS:
Must be willing to work all shifts, additional overtime, and weekends as needed
Must be able to work the following shift:
2nd shift (Monday - Friday: 4:00pm-3:30am)
Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
Must be able to lift up to 25 lbs. unassisted
COMPENSATION AND BENEFITS:
Pay range:
Structures Technician/Level 1: $22.00 - $27.00/hour
Structures Technician/Level 2: $25.00 - $32.50/hour
Structures Technician/Level 3: $30.00 - $38.00/hour
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short & long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation & will be eligible for 10 or more paid holidays per year.
ITAR REQUIREMENTS:
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here (https://www.pmddtc.state.gov/?id=ddtc_kb_article_page&sys_id=24d528fddbfc930044f9ff621f961987) .
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000.