US0060 Sysco Nashville, LLC
Diesel Fleet Mechanic – Sign On Bonus
US0060 Sysco Nashville, LLC, Brentwood, Tennessee, United States, 37027
Master Level Mechanic
Up to $7,500 Sign on bonus for new hires
Please ensure you read the below overview and requirements for this employment opportunity completely.Shift Differential of $2-$3 per hour depending on shift start time***This is either a 2nd shift 2pm - 10:30 pm Sun -Thur OR 3rd shift 10:30pm to 7:00am Sun - Thurs. The manager can work with you on which shift best fits your needs.PAY: up to $38.00 per hour based on experienceBOOT and TOOL allowancesFull time career with excellent benefitsStrong Stable Company! - Shift your career today to SYSCO!RESPONSIBILITIESPerform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment.Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer).Address all Driver Vehicle Inspection Report write ups timely, and efficiently.Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.Follow procedures including documenting all work performed on work orders.Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility.May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible.Proficient in electrical meter testingKnowledge of controls and electric (DC (distribution center) low voltageElectric motor knowledge (DC)Complete electrical repairs and welding projects as needed.QUALIFICATIONSPreferred EducationHigh school diploma or GEDCurrent and valid driver's license (CDL Preferred, Not Required)Preferred Experience5 years of experience in fleet maintenance and repairMedium / Heavy Duty truck technical training4 years of experience and 2-year schoolPreferred Certifications, Licenses and/or RegistrationsAnnual Inspector Certification Knowledge, Skills and AbilitiesBrake Inspector Certification Knowledge, Skills and AbilitiesASE certifications & Automotive or Medium/Heavy Duty TrucksEPA section 608 (Core & Type II) and 609 HVAC & Refrigeration CertificationProfessional SkillsExpert knowledge and skill of all vehicle systems and componentsExpert knowledge and skill in diagnosis and repair of electrical systems on all equipmentExpert knowledge and skill in diagnosis and repair of refrigeration systems (Expert knowledge and skill in Preventive Maintenance Inspections and repairModerate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)Moderate computer skills and knowledgeExpert knowledge of all DOT (FMCSA) regulationsModerate knowledge of OSHA safety regulationsModerate knowledge of environmental regulationsWorking knowledge of computer-based diagnostic software for OEM's and component manufacturersThe technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnosticsPhysical DemandsWhile performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear.
The employee is frequently required to sit and reach with hands and arms.
The employee must occasionally lift and/or move up to 20 pounds.
While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs.The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Ability to operate various pieces of equipmentAbility to stand, sit, walk, bend, reachAbility to push/pullAbility to lift /carryAbility to grasp toolsAbility to perform Repetitive motion: wrenches and hand toolsWorking conditions: Frequently works outdoors.Working ConditionsWhile performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).The associate is occasionally exposed to high, precarious places and confined spaces.The associate is occasionally exposed to fumes or airborne particles.The noise level in the work environment is usually moderate.
Up to $7,500 Sign on bonus for new hires
Please ensure you read the below overview and requirements for this employment opportunity completely.Shift Differential of $2-$3 per hour depending on shift start time***This is either a 2nd shift 2pm - 10:30 pm Sun -Thur OR 3rd shift 10:30pm to 7:00am Sun - Thurs. The manager can work with you on which shift best fits your needs.PAY: up to $38.00 per hour based on experienceBOOT and TOOL allowancesFull time career with excellent benefitsStrong Stable Company! - Shift your career today to SYSCO!RESPONSIBILITIESPerform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment.Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer).Address all Driver Vehicle Inspection Report write ups timely, and efficiently.Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.Follow procedures including documenting all work performed on work orders.Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility.May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible.Proficient in electrical meter testingKnowledge of controls and electric (DC (distribution center) low voltageElectric motor knowledge (DC)Complete electrical repairs and welding projects as needed.QUALIFICATIONSPreferred EducationHigh school diploma or GEDCurrent and valid driver's license (CDL Preferred, Not Required)Preferred Experience5 years of experience in fleet maintenance and repairMedium / Heavy Duty truck technical training4 years of experience and 2-year schoolPreferred Certifications, Licenses and/or RegistrationsAnnual Inspector Certification Knowledge, Skills and AbilitiesBrake Inspector Certification Knowledge, Skills and AbilitiesASE certifications & Automotive or Medium/Heavy Duty TrucksEPA section 608 (Core & Type II) and 609 HVAC & Refrigeration CertificationProfessional SkillsExpert knowledge and skill of all vehicle systems and componentsExpert knowledge and skill in diagnosis and repair of electrical systems on all equipmentExpert knowledge and skill in diagnosis and repair of refrigeration systems (Expert knowledge and skill in Preventive Maintenance Inspections and repairModerate knowledge and skill in welding and cutting (gas, electric, MIG, TIG)Moderate computer skills and knowledgeExpert knowledge of all DOT (FMCSA) regulationsModerate knowledge of OSHA safety regulationsModerate knowledge of environmental regulationsWorking knowledge of computer-based diagnostic software for OEM's and component manufacturersThe technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnosticsPhysical DemandsWhile performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear.
The employee is frequently required to sit and reach with hands and arms.
The employee must occasionally lift and/or move up to 20 pounds.
While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs.The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Ability to operate various pieces of equipmentAbility to stand, sit, walk, bend, reachAbility to push/pullAbility to lift /carryAbility to grasp toolsAbility to perform Repetitive motion: wrenches and hand toolsWorking conditions: Frequently works outdoors.Working ConditionsWhile performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).The associate is occasionally exposed to high, precarious places and confined spaces.The associate is occasionally exposed to fumes or airborne particles.The noise level in the work environment is usually moderate.