Dover Corporation
Advanced Manufacturing Engineer - Machining
Dover Corporation, River Grove, Illinois, United States, 60171
Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Clean Energy & Fueling, Imaging & Identification, Pumps & Process Solutions and Climate & Sustainable Technologies. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.
If you are interested in applying for this job, please make sure you meet the following requirements as listed below.
Position Summary:Reporting directly to the Dover Director of Advanced Manufacturing Machining, the Advanced Manufacturing Machining Engineer is responsible for executing the manufacturing roadmap for optimizing machining processes, proper use of the equipment, design specifications, setup reviews, and new control strategies.
AMME is responsible to lead and ensure that new equipment purchases are specified, sourced, qualified, and properly transitioned into mass production, meeting Dover and customer requirements and timing.
Essential Duties and Responsibilities:Support and partner with OpCo to drive improving OEE through initiatives such as SMED, TPM, etc. for new and existing equipment.Work on Dover corporate strategy to work with OpCo to drive productivity by internalizing spend (Buy2Make) on new capex and existing equipment by maximizing machine utilization.Lead SMED Events - Lead Site CNC technology Assessments – Project Manage Site improvement activitiesSupport and partner with OpCo to support on maturity journey for the Machining Excellence Playbook.Provide technical development and deployment for new technologies related to machining to drive productivity improvements.Drive and support machining strategy on productivity improvement by maximizing asset utilization.Assist in the evolution of the equipment and perform acceptance evaluation accordingly.Identify, recommend, procure, and install machine shop equipment as well as ensure all equipment is thoroughly maintained and calibratedSupport workforce utilization, space requirements, workflow, and design layout of equipment and workspace for maximum efficiency.Continuously improve, provide recommendation on upgrade of equipment to maximize asset utilization.Interface with tooling supplier to ensure use of proper tooling for production. Work with suppliers to develop better cutting tools for specific PM applications.Develop machining capability in-house while making changes to enhance the machine functionality.Identify, develop, and deploy new machining methods (or refine existing) to improve quality, reduce cost, and optimize build scheduleUtilize lean manufacturing methodology for process development and problem solvingPerform root cause analyses when non-conformances are identified and deploy corrective actionsHelping and supporting manufacturing, to achieve safety, quality, efficiency and throughput goals, identifying opportunities to improve.Apply Project Management skills & tools to lead and support capital equipment/improvement projects.Investigate equipment performance and identify any problems for corrective actions and solutions.Writes/revises User Requirement Specs, Functional Requirement, Design Specs, Qualifications, etc.Supports Factory and Site Acceptance Tests, Machinability Studies, and validation protocols.Responsible for review and approve PFMEA, DFMEA, PPAPs, and Standard Operating Procedures SOP and ensure that manufacturing and operations comply with.Utilize continuous improvement methodology to improve internal processes.Must be able to interact constructively across the whole organization to identify issues and implement improvements.Hands-on support of new products and new process launches.Must be able to handle multiple projects and multiple priorities simultaneously.Travel up to 70% may be required.Ability to perform other duties as assigned.
Qualifications/Requirements/Desired Characteristics:Bachelor’s degree in mechanical, electrical, or manufacturing engineering, industrial technology, or equivalent mix of education and experience.Minimum five (5) years’ experience in manufacturing engineering directly working with machining processes.Experience setting up and operating state-of-the-art machining equipment.Extensive experience in machining and maintenance.Well-versed in standard machine shop manufacturing processes and setupsStrong experience with SolidWorks or another mechanical CAD systemHighly experienced with a variety of precision conventional and advanced metrology systems (photogrammetry, CMMs, 3D imaging)Strong commitment to proper safety precautions in design and practiceStrong understanding of Lean concepts.Excellent interpersonal and influencing skills to interact with other departments.Ability to multi-task and perform in a dynamic environmentStrong sense of urgency, accountability and highly objective orientedHighly organized and efficient in approaching tasks, a self-starter with the ability to problem-solve.Clear, concise, and articulate communication skills - verbal, written, and listening.Strong team player, work ethic, and commitment to win the right way.Strong analytical skills, ability to think big, act small, and scale fast.
Key Accomplishments – Previous 12 MonthsDemonstrated experience in successfully achieving machining startups.Proven experience developing/starting new manufacturing processesDemonstrated experience improving productivity by machining optimizationDemonstrated experience improving OEE. And proven reduction in unplanned maintenance hoursDemonstrated experience utilizing Advanced Product Quality Planning Methodology and the integrated product and process development techniques within it. (e.g., Process Flow Diagrams, PFMEA, Control Plans, I/PPAP, Standard Work).Proven success managing medium and large-scale projects from concept development through successful implementation.
Work Arrangement : HybridSalary Range :
-We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position.
Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Job Function : Engineering
If you are interested in applying for this job, please make sure you meet the following requirements as listed below.
Position Summary:Reporting directly to the Dover Director of Advanced Manufacturing Machining, the Advanced Manufacturing Machining Engineer is responsible for executing the manufacturing roadmap for optimizing machining processes, proper use of the equipment, design specifications, setup reviews, and new control strategies.
AMME is responsible to lead and ensure that new equipment purchases are specified, sourced, qualified, and properly transitioned into mass production, meeting Dover and customer requirements and timing.
Essential Duties and Responsibilities:Support and partner with OpCo to drive improving OEE through initiatives such as SMED, TPM, etc. for new and existing equipment.Work on Dover corporate strategy to work with OpCo to drive productivity by internalizing spend (Buy2Make) on new capex and existing equipment by maximizing machine utilization.Lead SMED Events - Lead Site CNC technology Assessments – Project Manage Site improvement activitiesSupport and partner with OpCo to support on maturity journey for the Machining Excellence Playbook.Provide technical development and deployment for new technologies related to machining to drive productivity improvements.Drive and support machining strategy on productivity improvement by maximizing asset utilization.Assist in the evolution of the equipment and perform acceptance evaluation accordingly.Identify, recommend, procure, and install machine shop equipment as well as ensure all equipment is thoroughly maintained and calibratedSupport workforce utilization, space requirements, workflow, and design layout of equipment and workspace for maximum efficiency.Continuously improve, provide recommendation on upgrade of equipment to maximize asset utilization.Interface with tooling supplier to ensure use of proper tooling for production. Work with suppliers to develop better cutting tools for specific PM applications.Develop machining capability in-house while making changes to enhance the machine functionality.Identify, develop, and deploy new machining methods (or refine existing) to improve quality, reduce cost, and optimize build scheduleUtilize lean manufacturing methodology for process development and problem solvingPerform root cause analyses when non-conformances are identified and deploy corrective actionsHelping and supporting manufacturing, to achieve safety, quality, efficiency and throughput goals, identifying opportunities to improve.Apply Project Management skills & tools to lead and support capital equipment/improvement projects.Investigate equipment performance and identify any problems for corrective actions and solutions.Writes/revises User Requirement Specs, Functional Requirement, Design Specs, Qualifications, etc.Supports Factory and Site Acceptance Tests, Machinability Studies, and validation protocols.Responsible for review and approve PFMEA, DFMEA, PPAPs, and Standard Operating Procedures SOP and ensure that manufacturing and operations comply with.Utilize continuous improvement methodology to improve internal processes.Must be able to interact constructively across the whole organization to identify issues and implement improvements.Hands-on support of new products and new process launches.Must be able to handle multiple projects and multiple priorities simultaneously.Travel up to 70% may be required.Ability to perform other duties as assigned.
Qualifications/Requirements/Desired Characteristics:Bachelor’s degree in mechanical, electrical, or manufacturing engineering, industrial technology, or equivalent mix of education and experience.Minimum five (5) years’ experience in manufacturing engineering directly working with machining processes.Experience setting up and operating state-of-the-art machining equipment.Extensive experience in machining and maintenance.Well-versed in standard machine shop manufacturing processes and setupsStrong experience with SolidWorks or another mechanical CAD systemHighly experienced with a variety of precision conventional and advanced metrology systems (photogrammetry, CMMs, 3D imaging)Strong commitment to proper safety precautions in design and practiceStrong understanding of Lean concepts.Excellent interpersonal and influencing skills to interact with other departments.Ability to multi-task and perform in a dynamic environmentStrong sense of urgency, accountability and highly objective orientedHighly organized and efficient in approaching tasks, a self-starter with the ability to problem-solve.Clear, concise, and articulate communication skills - verbal, written, and listening.Strong team player, work ethic, and commitment to win the right way.Strong analytical skills, ability to think big, act small, and scale fast.
Key Accomplishments – Previous 12 MonthsDemonstrated experience in successfully achieving machining startups.Proven experience developing/starting new manufacturing processesDemonstrated experience improving productivity by machining optimizationDemonstrated experience improving OEE. And proven reduction in unplanned maintenance hoursDemonstrated experience utilizing Advanced Product Quality Planning Methodology and the integrated product and process development techniques within it. (e.g., Process Flow Diagrams, PFMEA, Control Plans, I/PPAP, Standard Work).Proven success managing medium and large-scale projects from concept development through successful implementation.
Work Arrangement : HybridSalary Range :
-We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position.
Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Job Function : Engineering