Coda Octopus Colmek
Electrical/Mechanical/Cable Harness Assembler
Coda Octopus Colmek, Murray, UT, United States
Full Listing
The Electrical-Mechanical, PCB and Cable Assembler will perform a variety of electronic assembly operations. Candidates must be capable of passing the IPC610 / J-STD-001 Class 3 Certified Application Specialist course and inspection against these standards. A current J-STD-001 Class 3 or IPC-610 Class 3 certification is a plus. You may be asked to inspect others' work per J-STD-001 Class 3. We offer competitive compensation, a fun, challenging work environment, as well as a great benefits package.
PCB Assembly duties to include prepping CCA's, soldering hand placed SMT and thru-hole parts using a microscope, placing parts as small as 0402, touch-up of CCA's (including jumpers), and reworking (R&R) CCA's and other assemblies. The candidate will perform all aspects of prototype and production assembly.
Electro-Mechanical Assembly duties include prepping and integrating chassis, related electro-mechanical assemblies, crimping, stripping, cable routing, staking, splicing, marking, labeling, soldering, and performs all aspects of prototype and production assembly.
Cable Assembly duties include routing/ties wires to form wire harness used in electrical and electronic equipment or systems. Ability to read instructions such as work orders, diagrams, and wire lists to determine materials needed and sequence of assembly. Select wires of specified color, determine marking, length, and loop wires between guide pegs on harness board, following color-coded lines or sequential numbers on board or diagram. Ability to wrap and tie wires together at designated points to form harness, manually or using tie-wrap gun. The candidate may attach ends of wires to components, plugs, or terminal strip, using soldering iron or crimping device. They may insert cable in plastic tubing or inject plastic sealant around terminals to protect cable from dust and moisture, mark completed harnesses, and may test wiring continuity, using a continuity tester.
The ideal candidate will be responsible for completing company paperwork and following company procedures, including work order, rework instructions, prints, drawings, and schematics. This individual will read assembly drawings and apply special instructions in drawing notes. Ability to read work orders, follow production drawings, and sample assemblies, or receive verbal instructions regarding duties is a must. This position requires basic computer skills and the ability to lift and move assemblies up to 50 pounds.
This position may also be required to assist with pulling kits, cycle counts and shipping and receiving as well as other various duties.
Qualifications
Must have a High School Diploma or GED and at least 5 years of related experience. Must be able to perform job duties with little to no assistance. Must have the level of expertise and interpersonal skills sufficient to provide on the job training to other assemblers. Experience working to schematics, process details and engineering drawings is required.
Must be able to work on Export-controlled and ITAR assemblies, and obtain a US Security Clearnce if required.
Candidate must be self-motivated and comfortable working in a fast-paced engineering environment.
Compensation
The Electrical-Mechanical, PCB and Cable Assembler will perform a variety of electronic assembly operations. Candidates must be capable of passing the IPC610 / J-STD-001 Class 3 Certified Application Specialist course and inspection against these standards. A current J-STD-001 Class 3 or IPC-610 Class 3 certification is a plus. You may be asked to inspect others' work per J-STD-001 Class 3. We offer competitive compensation, a fun, challenging work environment, as well as a great benefits package.
PCB Assembly duties to include prepping CCA's, soldering hand placed SMT and thru-hole parts using a microscope, placing parts as small as 0402, touch-up of CCA's (including jumpers), and reworking (R&R) CCA's and other assemblies. The candidate will perform all aspects of prototype and production assembly.
Electro-Mechanical Assembly duties include prepping and integrating chassis, related electro-mechanical assemblies, crimping, stripping, cable routing, staking, splicing, marking, labeling, soldering, and performs all aspects of prototype and production assembly.
Cable Assembly duties include routing/ties wires to form wire harness used in electrical and electronic equipment or systems. Ability to read instructions such as work orders, diagrams, and wire lists to determine materials needed and sequence of assembly. Select wires of specified color, determine marking, length, and loop wires between guide pegs on harness board, following color-coded lines or sequential numbers on board or diagram. Ability to wrap and tie wires together at designated points to form harness, manually or using tie-wrap gun. The candidate may attach ends of wires to components, plugs, or terminal strip, using soldering iron or crimping device. They may insert cable in plastic tubing or inject plastic sealant around terminals to protect cable from dust and moisture, mark completed harnesses, and may test wiring continuity, using a continuity tester.
The ideal candidate will be responsible for completing company paperwork and following company procedures, including work order, rework instructions, prints, drawings, and schematics. This individual will read assembly drawings and apply special instructions in drawing notes. Ability to read work orders, follow production drawings, and sample assemblies, or receive verbal instructions regarding duties is a must. This position requires basic computer skills and the ability to lift and move assemblies up to 50 pounds.
This position may also be required to assist with pulling kits, cycle counts and shipping and receiving as well as other various duties.
Qualifications
Must have a High School Diploma or GED and at least 5 years of related experience. Must be able to perform job duties with little to no assistance. Must have the level of expertise and interpersonal skills sufficient to provide on the job training to other assemblers. Experience working to schematics, process details and engineering drawings is required.
Must be able to work on Export-controlled and ITAR assemblies, and obtain a US Security Clearnce if required.
Candidate must be self-motivated and comfortable working in a fast-paced engineering environment.
Compensation
- Salary commensurate with experience
- Colmek offers medical, vision, dental, life, and disability Insurance
- Paid holidays and vacation
- 401 (k) option