Crissair
Static Assembly/Test Technician
Crissair, Valencia, California, us, 91385
Crissair is looking for entry level assemblers to join our Assembly & Test team!
Crissair's primary objective is designing, developing and manufacturing superior quality hydraulic, fuel and pneumatic system components of all complexity levels. Strict design specifications and rigorous quality criteria are the essential factors in Crissair's success.
Our deep knowledge and understanding of our markets and customers' industries allow us to adapt and deliver quality relevant products and services. This experience, together with our commitment to a customer-centric culture, is the reason why many of the world's largest companies turn to Crissair as a partner on everything from day-to-day operations to some of the most challenging Aerospace projects around the world.
SummaryAssembles parts to form complete units or subassemblies using technical drawings, specialized tools and written directions. Reassembles or reworks units as needed.Job Duties and Responsibilities include the following. Other tasks and duties may be required as directed.• Understand basic hydraulic concepts, the function of gauges, and Crissair assemblies in the hydraulic systems.• Assemble and test check valves per blueprint and ATP requirements with minimal supervision.• Maintain accurate parts and part count for each job.• Perform seat preparations (burnishing, coining, and cleaning) with minimal supervision per the applicable work instruction.• Install internal components using arbor press and/or proper tooling.• Report defective parts and rework per supervisor's instructions.• Be familiar with proper fixtures and tooling required to perform job function.• Set up test stands with appropriate test fixtures.• Read pressure gauges and accurately record data to ATP requirements.• Complete proper buy-off paperwork.• Set up and operate manual and pneumatic automators and drill press for end fitting swedging and crimp rolls.• Swedge fitting ends to form 37° and 45° angle or roll.• Lock-wire and torque-seal parts.• Follow daily dispatch reports and move jobs into ERP system.• Seek and document lean process improvement ideas to improve the efficiency of the department.• Maintain all hand tools in a clean and working condition.• Notify supervisor of equipment that requires repair.• Keep work station and test equipment clean and free of unnecessary debris.• Properly handle and dispose of chemicals used.• Maintain all safety standards and use safety equipment as required.• Maintain 100% quality rating and less than .1% rejected components (caused by tech damage).
Qualification RequirementsEducation/Experience• High School diploma or General Education Degree (GED); three to six months related experience or training. Will be required to earn Basic Hydraulics and Blueprint Reading certificates.
Language Skills• Good command of the English language, both written and spoken.• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.• Ability to write in simple correspondence.• Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees.
Math Skills• Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's.• Ability to perform operations using units of American money and weight measurement, volume, and distance.
Reasoning Skills• Ability to apply common sense understanding to carry out instructions furnished in written, verbal, or diagram form.• Ability to deal with problems involving several concrete variables in standardized situations.
Computer/ Office Skills• Basic windows/internet browser• ERP/Inventory• Will be required to obtain Basic Blueprint Reading and Hydraulics Certifications
Crissair, Inc. respects your privacy. To learn more, please read our Privacy Statement
CRISSAIR, INC. IS AN EQUAL OPPORTUNITY EMPLOYER. APPLICANTS ARE CONSIDERED ON THE BASIS OF SKILLS, EXPERIENCE, AND QUALIFICATIONS WITHOUT REGARD TO RACE, COLOR, RELIGION CREED, SEX, SEXUAL ORIENTATION, AGE, NATIONAL ORIGIN, ANCESTRY, MARITAL STATUS, PHYSICAL AND MENTAL DISABILITY, VETERAN STATUS, MEDICAL CONDITION, GENETIC INFORMATION OR CHARACTERISTICS, GENDER AND GENDER IDENTITY, OR ANY OTHER LEGALLY PROTECTED STATUS. PLEASE NOTE, THE COMPANY PROVIDES GOODS AND SERVICES TO THE US GOVERNMENT UNDER THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (ITAR) AND MUST COMPLY WITH THE REQUIREMENT THAT ALL EMPLOYEES BE US CITIZENS OR PERMANENT US RESIDENTS WITH VALID GREEN CARDS.
Read More
Crissair's primary objective is designing, developing and manufacturing superior quality hydraulic, fuel and pneumatic system components of all complexity levels. Strict design specifications and rigorous quality criteria are the essential factors in Crissair's success.
Our deep knowledge and understanding of our markets and customers' industries allow us to adapt and deliver quality relevant products and services. This experience, together with our commitment to a customer-centric culture, is the reason why many of the world's largest companies turn to Crissair as a partner on everything from day-to-day operations to some of the most challenging Aerospace projects around the world.
SummaryAssembles parts to form complete units or subassemblies using technical drawings, specialized tools and written directions. Reassembles or reworks units as needed.Job Duties and Responsibilities include the following. Other tasks and duties may be required as directed.• Understand basic hydraulic concepts, the function of gauges, and Crissair assemblies in the hydraulic systems.• Assemble and test check valves per blueprint and ATP requirements with minimal supervision.• Maintain accurate parts and part count for each job.• Perform seat preparations (burnishing, coining, and cleaning) with minimal supervision per the applicable work instruction.• Install internal components using arbor press and/or proper tooling.• Report defective parts and rework per supervisor's instructions.• Be familiar with proper fixtures and tooling required to perform job function.• Set up test stands with appropriate test fixtures.• Read pressure gauges and accurately record data to ATP requirements.• Complete proper buy-off paperwork.• Set up and operate manual and pneumatic automators and drill press for end fitting swedging and crimp rolls.• Swedge fitting ends to form 37° and 45° angle or roll.• Lock-wire and torque-seal parts.• Follow daily dispatch reports and move jobs into ERP system.• Seek and document lean process improvement ideas to improve the efficiency of the department.• Maintain all hand tools in a clean and working condition.• Notify supervisor of equipment that requires repair.• Keep work station and test equipment clean and free of unnecessary debris.• Properly handle and dispose of chemicals used.• Maintain all safety standards and use safety equipment as required.• Maintain 100% quality rating and less than .1% rejected components (caused by tech damage).
Qualification RequirementsEducation/Experience• High School diploma or General Education Degree (GED); three to six months related experience or training. Will be required to earn Basic Hydraulics and Blueprint Reading certificates.
Language Skills• Good command of the English language, both written and spoken.• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.• Ability to write in simple correspondence.• Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees.
Math Skills• Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's.• Ability to perform operations using units of American money and weight measurement, volume, and distance.
Reasoning Skills• Ability to apply common sense understanding to carry out instructions furnished in written, verbal, or diagram form.• Ability to deal with problems involving several concrete variables in standardized situations.
Computer/ Office Skills• Basic windows/internet browser• ERP/Inventory• Will be required to obtain Basic Blueprint Reading and Hydraulics Certifications
Crissair, Inc. respects your privacy. To learn more, please read our Privacy Statement
CRISSAIR, INC. IS AN EQUAL OPPORTUNITY EMPLOYER. APPLICANTS ARE CONSIDERED ON THE BASIS OF SKILLS, EXPERIENCE, AND QUALIFICATIONS WITHOUT REGARD TO RACE, COLOR, RELIGION CREED, SEX, SEXUAL ORIENTATION, AGE, NATIONAL ORIGIN, ANCESTRY, MARITAL STATUS, PHYSICAL AND MENTAL DISABILITY, VETERAN STATUS, MEDICAL CONDITION, GENETIC INFORMATION OR CHARACTERISTICS, GENDER AND GENDER IDENTITY, OR ANY OTHER LEGALLY PROTECTED STATUS. PLEASE NOTE, THE COMPANY PROVIDES GOODS AND SERVICES TO THE US GOVERNMENT UNDER THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (ITAR) AND MUST COMPLY WITH THE REQUIREMENT THAT ALL EMPLOYEES BE US CITIZENS OR PERMANENT US RESIDENTS WITH VALID GREEN CARDS.
Read More