Graham Corporation
Inspector NDE II - 2nd shift
Graham Corporation, Batavia, New York, United States, 14020
Job Title:
Inspector NDE II
Reports To:
Quality Control Supervisor
FLSA Status & EEO Code:
Non-Exempt & Technician
Division/Department:
GHM/Quality
Level of Work:
Level I
Position Summary:
The Inspector NDE II (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and evaluate results as per applicable codes, standards, and specifications. Should be familiar with technique limitations. Organize and report the results. Should exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. Inspects components, assemblies, and related paperwork to ensure compliance with contract specifications. Ensures that no non-conforming or rejected product gets shipped to the end user or customer. Focused on providing the highest quality products to customers. Second shift position.
Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as neededUtilize the drawings and specifications to develop a plan for basic manual inspections.Evaluate parts to ensure that they meet the specified requirements per the inspection plans.Complete the inspection step on the router to properly indicate pass/fail and note the time to ensure the inspection results are traceability to the appropriate inspectorKnowledge of proper inspection techniques required to obtain accurate results.Perform dimensional inspection on precision machined products and assemblies unassisted.Follow instructions - oral and/or written
Can properly read all blueprint and work instructionsWill provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.Performs other duties as assigned by the Quality Control Supervisor or his/her designate.Safety & House-keeping
Work may require use of scaffold, ladders, forklift, and/or scissor lift.Maintains a clean work area with no clutter.Practices safety at all times while at work.Follows safety policies and procedures and speaks up when others are non-compliant.Wears all safety equipment for area of work.Continual Improvement suggestions
Keeps an open mind to others continuous improvement suggestionsBring continuous improvement suggestions to the appropriate team member.Professional Development
Demonstrates initiative, positive attitude, and enthusiasm for the jobWill follow up with supervisor on professional development goals and opportunitiesTakes an interest and lets it be known that they have a desire to grow with the companyRequirements
Qualifications:
To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.
Education and Training
Technical Trades School in Welding or InspectionHigh school diploma or GEDNDT Level II Certification in RT per ASNT SNT-TC-1AExperience:
NDT Training with required hours (80).NDT Experience in total hours (1600).Hours can be verified and recorded per ASNT SNT-TC-1A.Other:
Must be willing to work overtime as required.Local travel may be required.Second shift positionSkills:
To perform the job successfully, an individual should demonstrate the following competencies:
Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software.Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.Strong written and verbal communication skills required.Strong organization and time management skills.High attention to detail.Demonstrate behavior consistent with company values.Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment.Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements.Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes.
Physical and Mental Demands:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.•Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.•Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.•Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.Date Finalized: 1/26/24
Salary Description
$27-$36/hour
Inspector NDE II
Reports To:
Quality Control Supervisor
FLSA Status & EEO Code:
Non-Exempt & Technician
Division/Department:
GHM/Quality
Level of Work:
Level I
Position Summary:
The Inspector NDE II (RT) performs inspections with supervision and mentoring. Qualified to set up and calibrate equipment and interpret and evaluate results as per applicable codes, standards, and specifications. Should be familiar with technique limitations. Organize and report the results. Should exercise assigned responsibility for on-the-job training and guidance of trainees and Level I personnel. Inspects components, assemblies, and related paperwork to ensure compliance with contract specifications. Ensures that no non-conforming or rejected product gets shipped to the end user or customer. Focused on providing the highest quality products to customers. Second shift position.
Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as neededUtilize the drawings and specifications to develop a plan for basic manual inspections.Evaluate parts to ensure that they meet the specified requirements per the inspection plans.Complete the inspection step on the router to properly indicate pass/fail and note the time to ensure the inspection results are traceability to the appropriate inspectorKnowledge of proper inspection techniques required to obtain accurate results.Perform dimensional inspection on precision machined products and assemblies unassisted.Follow instructions - oral and/or written
Can properly read all blueprint and work instructionsWill provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.Performs other duties as assigned by the Quality Control Supervisor or his/her designate.Safety & House-keeping
Work may require use of scaffold, ladders, forklift, and/or scissor lift.Maintains a clean work area with no clutter.Practices safety at all times while at work.Follows safety policies and procedures and speaks up when others are non-compliant.Wears all safety equipment for area of work.Continual Improvement suggestions
Keeps an open mind to others continuous improvement suggestionsBring continuous improvement suggestions to the appropriate team member.Professional Development
Demonstrates initiative, positive attitude, and enthusiasm for the jobWill follow up with supervisor on professional development goals and opportunitiesTakes an interest and lets it be known that they have a desire to grow with the companyRequirements
Qualifications:
To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.
Education and Training
Technical Trades School in Welding or InspectionHigh school diploma or GEDNDT Level II Certification in RT per ASNT SNT-TC-1AExperience:
NDT Training with required hours (80).NDT Experience in total hours (1600).Hours can be verified and recorded per ASNT SNT-TC-1A.Other:
Must be willing to work overtime as required.Local travel may be required.Second shift positionSkills:
To perform the job successfully, an individual should demonstrate the following competencies:
Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software.Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site.Strong written and verbal communication skills required.Strong organization and time management skills.High attention to detail.Demonstrate behavior consistent with company values.Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment.Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements.Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes.
Physical and Mental Demands:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.•Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.•Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.•Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.Date Finalized: 1/26/24
Salary Description
$27-$36/hour