ONEOK
Instrumentation Technician - Lead
ONEOK, Watford City, North Dakota, United States, 58854
WeAreONEOK
– Fortune 500 company. 100+ years in business. Leading midstream service provider. Safety first. Sustainable operations. Environmentally responsible. Employee focused.
JOB SUMMARYLeads or performs a specialized level of work including installation, troubleshooting, calibrating, maintaining and repair of various electrical/electronic, pneumatic, hydraulic, analyzers, measurement, control and automation systems, and related equipment.
Essential Functions and Responsibilities
Install, operate, inspect, troubleshoot, repair, calibrate/adjust, and maintain the following equipment including but not limited to:
Calorimeters
Gravitometers/Densitometers
Chromatographs
Telemetering systems
Moisture analyzers
ESD systems/UPS systems
Electronic odorization systems
Flow computers
PH and conductivity probes
Instrumentation
Meter tubes and orifice plates
Satellite equipment
Analytical equipment
Supervisory Control and Data Acquisition system and remote terminal units and equipment
Distributed Control System (DCS)
Programmable Logic Control (PLC) systems
Perform preventative maintenance and/or analytical testing on compressors/engines, drivers, and auxiliary equipment.
Maintain electrical power circuits, switch gear, and power distribution including high voltage.
Perform and/or observe measurement equipment witness tests.
Install and maintain security/intrusion systems.
Drive and ensure maintenance is complete on company vehicles.
Maintain, calculate, prepare, and approve reports and records including but not limited to:
Maintenance and repair records
Safety and environmental reports
Mechanical drawings
Electrical schematics and diagrams
Pressure readings
Material and supply orders
Loop sheets
Meter tube/orifice plate ratios
Orifice and positive meter flow rates and capacities
Work planning
Work procedures
Responsibilities may include Department of Transportation (DOT) covered functions, including operations, maintenance, or emergency response on a pipeline. Job duties also require the employee to be alert and respond immediately to dangerous or hazardous conditions, and where impaired performance, or failure to follow safety precautions, could result in serious injury or property damage.
Education
None Required.
Work Experience
Experience in use and function of tools and equipment applicable to position including but not limited to:
Manual/power tools
Electronic testing devices
Control devices
Experience and training related to:
Gas processing fundamentals
Computers and related software
Governmental rules, regulations, and (electric) codes
Company policies and procedures including safe handling practices for flammable gases, liquids, and high pressure systems.
Experience reading and interpreting repair orders, mechanical drawings, procedures, charts, diagrams, dials, gauges, and equipment manuals.
Experience preparing, processing, or verifying maintenance and repair records, safety and environmental reports, electrical schematics and diagrams, pressure readings, and material and supply orders.
Knowledge, Skills and Abilities
Knowledge of: reciprocating or gas turbine engines, compressors, and electronic and processing equipment applicable to position.
Knowledge of: instrumentation, electronics, tools and control systems.
Ability to: apply addition, subtraction, multiplication, division, and algebraic formulas.
Ability to: communicate and/or exchange information or instruction.
Licenses and Certifications
None required.
Strength Factor Rating - Physical Demands/Requirements
Heavy Work - Exerting 50 to 100 pounds of force occasionally and/or 25 to 50 pounds of force frequently and/or 10 to 20 pounds of force constantly to move objects. Physical Demand requirements are in excess of those for Medium Work.
Strength Factor Description - Physical Demands/Requirements
Standing: Remaining on one's feet in an upright position at a work station without moving about (Frequently).
Walking: Moving about on foot (Frequently).
Sitting: Remaining in a seated position (Occasionally).
Lifting: Raising or lowering an object from one level to another (Occasionally).
Carrying: Transporting an object, usually holding it in the hands or arms, or on the shoulder (Occasionally).
Pushing: Exerting force upon an object so that the object moves away from the force (Occasionally).
Pulling: Exerting force upon an object so that the object moves toward the force (includes jerking) (Occasionally).
Climbing: Ladders, Stairs (Occasionally).
Balancing: Maintaining body equilibrium to prevent falling (Occasionally).
Stooping: Bending the body downward and forward by bending the spine at the waist (Occasionally).
Kneeling: Bending the legs at the knees to come to rest on the knee or knees (Occasionally).
Crouching: Bending the body downward and forward by bending the legs and spine (Occasionally).
Crawling: Moving about on the hands and arms in any direction (Occasionally).
Reaching: Extending hands and arms in any direction (Constantly).
Handling: Seizing, holding, grasping, turning or otherwise working with the hand or hands (Manual Dexterity) (Constantly).
Fingering: Picking, pinching or otherwise working with the fingers primarily (Finger Dexterity) (Constantly).
Feeling: Perceiving such attributes of objects/materials as size, shape, temperature, texture, movement or pulsation by receptors in the skin, particularly those of the finger tips (Constantly).
Talking: Expressing or exchanging ideas/information by means of the spoken word (Frequently).
Hearing: Perceiving the nature of sound by the ear (Frequently).
Tasting/Smelling: (Constantly).
Near Vision: Clarity of vision at 20 inches or less (Constantly).
Far Vision: Clarity of vision at 20 feet for more (Constantly).
Depth Perception: Three-dimensional vision; ability to judge distances and spatial relationships so as to see objects where and as they actually are (Constantly).
Vision: Color - The ability to identify and distinguish colors (Constantly).
Working Conditions/Environment
Employee is subject to inside and outside environmental conditions.
Working Conditions
Well lighted, climate controlled areas (Frequently).
Outdoor weather conditions (Frequently).
Wet or humid conditions (not weather related) (Frequently).
Extreme cold (not weather related) (Frequently).
Extreme heat (not weather related) (Frequently).
Dust, fumes, gases (Frequently).
Moving mechanical parts (Frequently).
Potential electric shock (Frequently).
Prolonged exposure to vibration (Frequently).
High pitched noises/loud noises (Frequently).
Unprotected heights (Frequently).
Frequent repetitive motion (Constantly).
CRT (Computer Monitor(s)) (Constantly).
Travel
Travel expected within an assigned area, and as required to other locations.
Driving
Based on assigned tasks, employee may be assigned a company vehicle requiring the applicable driver's license.
ONEOK is an equal opportunity employer committed to diversity and inclusion. All qualified applicants will receive consideration for employment without regard to race, color, sex, pregnancy, sexual orientation, age, religion, creed, national origin, gender identity, disability, military/veteran status, genetic information or any other categories protected by applicable law.
The job description is not intended to be a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of ONEOK.
ONEOK is committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request an accommodation email
HRSolutions@ONEOK.com
or call 1-855-663-6547.
Expected Salary Range$91,000.00 - $137,000.00
#J-18808-Ljbffr
– Fortune 500 company. 100+ years in business. Leading midstream service provider. Safety first. Sustainable operations. Environmentally responsible. Employee focused.
JOB SUMMARYLeads or performs a specialized level of work including installation, troubleshooting, calibrating, maintaining and repair of various electrical/electronic, pneumatic, hydraulic, analyzers, measurement, control and automation systems, and related equipment.
Essential Functions and Responsibilities
Install, operate, inspect, troubleshoot, repair, calibrate/adjust, and maintain the following equipment including but not limited to:
Calorimeters
Gravitometers/Densitometers
Chromatographs
Telemetering systems
Moisture analyzers
ESD systems/UPS systems
Electronic odorization systems
Flow computers
PH and conductivity probes
Instrumentation
Meter tubes and orifice plates
Satellite equipment
Analytical equipment
Supervisory Control and Data Acquisition system and remote terminal units and equipment
Distributed Control System (DCS)
Programmable Logic Control (PLC) systems
Perform preventative maintenance and/or analytical testing on compressors/engines, drivers, and auxiliary equipment.
Maintain electrical power circuits, switch gear, and power distribution including high voltage.
Perform and/or observe measurement equipment witness tests.
Install and maintain security/intrusion systems.
Drive and ensure maintenance is complete on company vehicles.
Maintain, calculate, prepare, and approve reports and records including but not limited to:
Maintenance and repair records
Safety and environmental reports
Mechanical drawings
Electrical schematics and diagrams
Pressure readings
Material and supply orders
Loop sheets
Meter tube/orifice plate ratios
Orifice and positive meter flow rates and capacities
Work planning
Work procedures
Responsibilities may include Department of Transportation (DOT) covered functions, including operations, maintenance, or emergency response on a pipeline. Job duties also require the employee to be alert and respond immediately to dangerous or hazardous conditions, and where impaired performance, or failure to follow safety precautions, could result in serious injury or property damage.
Education
None Required.
Work Experience
Experience in use and function of tools and equipment applicable to position including but not limited to:
Manual/power tools
Electronic testing devices
Control devices
Experience and training related to:
Gas processing fundamentals
Computers and related software
Governmental rules, regulations, and (electric) codes
Company policies and procedures including safe handling practices for flammable gases, liquids, and high pressure systems.
Experience reading and interpreting repair orders, mechanical drawings, procedures, charts, diagrams, dials, gauges, and equipment manuals.
Experience preparing, processing, or verifying maintenance and repair records, safety and environmental reports, electrical schematics and diagrams, pressure readings, and material and supply orders.
Knowledge, Skills and Abilities
Knowledge of: reciprocating or gas turbine engines, compressors, and electronic and processing equipment applicable to position.
Knowledge of: instrumentation, electronics, tools and control systems.
Ability to: apply addition, subtraction, multiplication, division, and algebraic formulas.
Ability to: communicate and/or exchange information or instruction.
Licenses and Certifications
None required.
Strength Factor Rating - Physical Demands/Requirements
Heavy Work - Exerting 50 to 100 pounds of force occasionally and/or 25 to 50 pounds of force frequently and/or 10 to 20 pounds of force constantly to move objects. Physical Demand requirements are in excess of those for Medium Work.
Strength Factor Description - Physical Demands/Requirements
Standing: Remaining on one's feet in an upright position at a work station without moving about (Frequently).
Walking: Moving about on foot (Frequently).
Sitting: Remaining in a seated position (Occasionally).
Lifting: Raising or lowering an object from one level to another (Occasionally).
Carrying: Transporting an object, usually holding it in the hands or arms, or on the shoulder (Occasionally).
Pushing: Exerting force upon an object so that the object moves away from the force (Occasionally).
Pulling: Exerting force upon an object so that the object moves toward the force (includes jerking) (Occasionally).
Climbing: Ladders, Stairs (Occasionally).
Balancing: Maintaining body equilibrium to prevent falling (Occasionally).
Stooping: Bending the body downward and forward by bending the spine at the waist (Occasionally).
Kneeling: Bending the legs at the knees to come to rest on the knee or knees (Occasionally).
Crouching: Bending the body downward and forward by bending the legs and spine (Occasionally).
Crawling: Moving about on the hands and arms in any direction (Occasionally).
Reaching: Extending hands and arms in any direction (Constantly).
Handling: Seizing, holding, grasping, turning or otherwise working with the hand or hands (Manual Dexterity) (Constantly).
Fingering: Picking, pinching or otherwise working with the fingers primarily (Finger Dexterity) (Constantly).
Feeling: Perceiving such attributes of objects/materials as size, shape, temperature, texture, movement or pulsation by receptors in the skin, particularly those of the finger tips (Constantly).
Talking: Expressing or exchanging ideas/information by means of the spoken word (Frequently).
Hearing: Perceiving the nature of sound by the ear (Frequently).
Tasting/Smelling: (Constantly).
Near Vision: Clarity of vision at 20 inches or less (Constantly).
Far Vision: Clarity of vision at 20 feet for more (Constantly).
Depth Perception: Three-dimensional vision; ability to judge distances and spatial relationships so as to see objects where and as they actually are (Constantly).
Vision: Color - The ability to identify and distinguish colors (Constantly).
Working Conditions/Environment
Employee is subject to inside and outside environmental conditions.
Working Conditions
Well lighted, climate controlled areas (Frequently).
Outdoor weather conditions (Frequently).
Wet or humid conditions (not weather related) (Frequently).
Extreme cold (not weather related) (Frequently).
Extreme heat (not weather related) (Frequently).
Dust, fumes, gases (Frequently).
Moving mechanical parts (Frequently).
Potential electric shock (Frequently).
Prolonged exposure to vibration (Frequently).
High pitched noises/loud noises (Frequently).
Unprotected heights (Frequently).
Frequent repetitive motion (Constantly).
CRT (Computer Monitor(s)) (Constantly).
Travel
Travel expected within an assigned area, and as required to other locations.
Driving
Based on assigned tasks, employee may be assigned a company vehicle requiring the applicable driver's license.
ONEOK is an equal opportunity employer committed to diversity and inclusion. All qualified applicants will receive consideration for employment without regard to race, color, sex, pregnancy, sexual orientation, age, religion, creed, national origin, gender identity, disability, military/veteran status, genetic information or any other categories protected by applicable law.
The job description is not intended to be a complete list of all responsibilities, duties or skills required for the job and is subject to review and change at any time, with or without notice, in accordance with the needs of ONEOK.
ONEOK is committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request an accommodation email
HRSolutions@ONEOK.com
or call 1-855-663-6547.
Expected Salary Range$91,000.00 - $137,000.00
#J-18808-Ljbffr