Calpine
Siemens GT Fleet - Technical Services Lead
Calpine, Pasadena, Texas, United States, 77505
Description
Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner.The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity.Job Summary (includes but is not limited to the following, other duties may be assigned)The Siemens Gas Turbine Technical Services Lead (TSL) will support the Gas Turbine Technical Services Director (TSD) in overseeing inspection and maintenance activities across our fleet of Siemens Gas Turbines, including but not limited to 501Fs,501Gs, 501D5s, and V84s. This supporting role includes all aspects of the responsibilities associated with back-office outage management, plus occasional dispatching to site to fulfill a Turbine Engineer (TE) role for outage execution in times of peak resource demands. The TSL will hold safety at the forefront, while balancing quality workmanship, outage planning, repair necessities, and risks against the constraints of time, budget, and market requirements to develop and help fulfill efficient and prudent generator maintenance scopes.Job ResponsibilitiesServing as the primary backup for the TSD, focusing on the Siemens gas turbine models.Support maintenance planning and execution for Siemens gas turbines, both remotely and on-site.Tracking and administratively supporting outages as necessary.Participating in root cause analysis, and managing the associated process and corrective measures as necessary.Providing technical support for online conditions, forced outages, and outage discoveries.Reviewing outage reports.Aiding in planning, scheduling, and budgeting associated with Gas turbine maintenance.Leading development of fleet issue solutions.Leading development on fleet specific QA/QC sheets as necessarySupervising OEM's and third party vendors in their generator-related scopes with an eye for Calpine's best interests; including promoting and monitoring safety and quality, providing an in-house second opinion on the necessary work scopes, curtailing wasteful efforts, and taking necessary steps to keep the work scope moving ahead efficiently.Performing inspections and mechanical maintenance on gas turbines and generators.Evaluating test and inspection data supplied by other vendors.Providing maintenance and repair recommendations, creating and scheduling outage scopes accordingly.Soliciting and select vendors for quotes for outage scopes as necessary.Instruct millwrights in performing repairs on Gas turbines and generators.Writing reports to document outage finding and activities and provide recommendations for future outages as necessary.Expanding TE knowledge base, including keeping tabs on developments in testing and maintenance practices, as well as supervising mechanical disassembly/reassembly if necessary.Communicating with and educating upper management and plant management as necessary on Siemens gas turbine issues and events.Researching and developing improved inspection, testing, and repair techniques.Work with other Calpine organizations to streamline outages
Job RequirementsBachelors of Science degree or better in mechanical or electrical engineering preferred, but other degrees and education levels will be considered based on demonstrated experience, knowledge, and ability.Strong working knowledge of Siemens gas turbine inspection, testing, and maintenance practices.Mininum 15 years of experience preferred.5+ years of Siemens Turbine Maintenance experience, with a focus on Siemens gas turbines.Ability to be self-motivated and self-directed to work independently with minimal supervision, yet able to work as a team.Curiosity and determination to drive innovative solutions and expand the acquired knowledge base.Organizational skills, communication skills and attention to detail.
Preferential QualificationsSignificant experience with Siemens gas turbine technologies.Military, OEM, or Merchant Marine power maintenance training.7+ years in the industry.
Additional Calpine Information:Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis.
Please view Equal Employment Opportunity Posters provided by OFCCP hereEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)
Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner.The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity.Job Summary (includes but is not limited to the following, other duties may be assigned)The Siemens Gas Turbine Technical Services Lead (TSL) will support the Gas Turbine Technical Services Director (TSD) in overseeing inspection and maintenance activities across our fleet of Siemens Gas Turbines, including but not limited to 501Fs,501Gs, 501D5s, and V84s. This supporting role includes all aspects of the responsibilities associated with back-office outage management, plus occasional dispatching to site to fulfill a Turbine Engineer (TE) role for outage execution in times of peak resource demands. The TSL will hold safety at the forefront, while balancing quality workmanship, outage planning, repair necessities, and risks against the constraints of time, budget, and market requirements to develop and help fulfill efficient and prudent generator maintenance scopes.Job ResponsibilitiesServing as the primary backup for the TSD, focusing on the Siemens gas turbine models.Support maintenance planning and execution for Siemens gas turbines, both remotely and on-site.Tracking and administratively supporting outages as necessary.Participating in root cause analysis, and managing the associated process and corrective measures as necessary.Providing technical support for online conditions, forced outages, and outage discoveries.Reviewing outage reports.Aiding in planning, scheduling, and budgeting associated with Gas turbine maintenance.Leading development of fleet issue solutions.Leading development on fleet specific QA/QC sheets as necessarySupervising OEM's and third party vendors in their generator-related scopes with an eye for Calpine's best interests; including promoting and monitoring safety and quality, providing an in-house second opinion on the necessary work scopes, curtailing wasteful efforts, and taking necessary steps to keep the work scope moving ahead efficiently.Performing inspections and mechanical maintenance on gas turbines and generators.Evaluating test and inspection data supplied by other vendors.Providing maintenance and repair recommendations, creating and scheduling outage scopes accordingly.Soliciting and select vendors for quotes for outage scopes as necessary.Instruct millwrights in performing repairs on Gas turbines and generators.Writing reports to document outage finding and activities and provide recommendations for future outages as necessary.Expanding TE knowledge base, including keeping tabs on developments in testing and maintenance practices, as well as supervising mechanical disassembly/reassembly if necessary.Communicating with and educating upper management and plant management as necessary on Siemens gas turbine issues and events.Researching and developing improved inspection, testing, and repair techniques.Work with other Calpine organizations to streamline outages
Job RequirementsBachelors of Science degree or better in mechanical or electrical engineering preferred, but other degrees and education levels will be considered based on demonstrated experience, knowledge, and ability.Strong working knowledge of Siemens gas turbine inspection, testing, and maintenance practices.Mininum 15 years of experience preferred.5+ years of Siemens Turbine Maintenance experience, with a focus on Siemens gas turbines.Ability to be self-motivated and self-directed to work independently with minimal supervision, yet able to work as a team.Curiosity and determination to drive innovative solutions and expand the acquired knowledge base.Organizational skills, communication skills and attention to detail.
Preferential QualificationsSignificant experience with Siemens gas turbine technologies.Military, OEM, or Merchant Marine power maintenance training.7+ years in the industry.
Additional Calpine Information:Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis.
Please view Equal Employment Opportunity Posters provided by OFCCP hereEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)