Navistar
General Technician Assembly or Process Technician PrePaint
Navistar, Tulsa, Oklahoma, United States, 74145
Position Overview:
This requisition is for Contractor Conversion purposes.Responsibilities:General Technician:Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteriaCollaborate with peers to accomplish projects or tasksDevelop and maintain relationships with peers and customersParticipate in group discussions and meetingsPerform checks on product and processEnsure material integrity by routine inspection by following established procedures and quality processes and specificationsEnsure piece and work output meets specificationsSort and separate defective materials and partsAssemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specificationsAssemble/disassemble small parts not requiring precision alignment or small tolerancesAssemble/disassemble small parts requiring precision alignment and small tolerancesPerforms any other assigned taskProcess Technician Pre-Paint:Prepare paint area appropriately to result in good paint application that meets paint specification criteriaPaint components using appropriate spray techniquesKnowledgeable on how to adjust the spray equipmentPrep the bus to mask the areas that they will paintKnowledgeable of proper spray techniquesMix paints and work with solventsIdentify paint defectsMaintain their equipmentKnowledgeable on basic safety precautions when handling paints/solventsPerform tasks in full gear of painters personal protective equipment (PPE)Perform any other assigned tasksMinimum Requirements:
NoneAdditional Requirements:
Qualified candidates, excluding current Navistar employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. Navistar does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)Ability to read and follow work proceduresAbility to work in areas that are hard to reach and in awkward positionsAbility to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paintsAbility to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory toolsThis position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process
Desired Skills:General Technician:Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening toolsAbility to achieve high performance goals with changing work directionsExperience with body repairProcess Technician Pre-Paint:At least a year of automotive hands on experienceAt least 3 months of automotive painting workAbility to achieve high performance goals with changing work directionsGood mechanical aptitude
Company Overview:Navistar, Inc. (Navistar) is a purpose-driven company, reimagining how to deliver what matters to create more cohesive relationships, build higher-performing teams and find solutions where others dont.Based in Lisle, Illinois, Navistar or its subsidiaries and affiliates produce International brand commercial trucks and engines, IC Bus brand school and commercial buses, all-makes OnCommand Connection advanced connectivity services, and Fleetrite, ReNEWeD and Diamond Advantage brand aftermarket parts.With a history of innovation dating back to 1831, Navistar has more than 14,500 employees worldwide and is part of TRATON SE, a global champion of the truck and transport services industry. Additional information is available at www.Navistar.com.Accelerating the Impact of Sustainable Mobility:Visit us at
www.Navistar.com
to discover more about our organization.
Navistar is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email
HRC@Navistar.com
to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
#ridewithnavistar
This requisition is for Contractor Conversion purposes.Responsibilities:General Technician:Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteriaCollaborate with peers to accomplish projects or tasksDevelop and maintain relationships with peers and customersParticipate in group discussions and meetingsPerform checks on product and processEnsure material integrity by routine inspection by following established procedures and quality processes and specificationsEnsure piece and work output meets specificationsSort and separate defective materials and partsAssemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specificationsAssemble/disassemble small parts not requiring precision alignment or small tolerancesAssemble/disassemble small parts requiring precision alignment and small tolerancesPerforms any other assigned taskProcess Technician Pre-Paint:Prepare paint area appropriately to result in good paint application that meets paint specification criteriaPaint components using appropriate spray techniquesKnowledgeable on how to adjust the spray equipmentPrep the bus to mask the areas that they will paintKnowledgeable of proper spray techniquesMix paints and work with solventsIdentify paint defectsMaintain their equipmentKnowledgeable on basic safety precautions when handling paints/solventsPerform tasks in full gear of painters personal protective equipment (PPE)Perform any other assigned tasksMinimum Requirements:
NoneAdditional Requirements:
Qualified candidates, excluding current Navistar employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. Navistar does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)Ability to read and follow work proceduresAbility to work in areas that are hard to reach and in awkward positionsAbility to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paintsAbility to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory toolsThis position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process
Desired Skills:General Technician:Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening toolsAbility to achieve high performance goals with changing work directionsExperience with body repairProcess Technician Pre-Paint:At least a year of automotive hands on experienceAt least 3 months of automotive painting workAbility to achieve high performance goals with changing work directionsGood mechanical aptitude
Company Overview:Navistar, Inc. (Navistar) is a purpose-driven company, reimagining how to deliver what matters to create more cohesive relationships, build higher-performing teams and find solutions where others dont.Based in Lisle, Illinois, Navistar or its subsidiaries and affiliates produce International brand commercial trucks and engines, IC Bus brand school and commercial buses, all-makes OnCommand Connection advanced connectivity services, and Fleetrite, ReNEWeD and Diamond Advantage brand aftermarket parts.With a history of innovation dating back to 1831, Navistar has more than 14,500 employees worldwide and is part of TRATON SE, a global champion of the truck and transport services industry. Additional information is available at www.Navistar.com.Accelerating the Impact of Sustainable Mobility:Visit us at
www.Navistar.com
to discover more about our organization.
Navistar is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email
HRC@Navistar.com
to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
#ridewithnavistar